Hiring.Camp

2nd Shift - Operations Quality Engineer

RTX

·

3 weeks ago

Location
US-MA-ANDOVER-AN2 ~ 352 Lowell St ~ AN2 HAMPSHIRE BLDG, United States of America
Workplace
Onsite
Type
Full-time
Department
Engineering
Clearance
Required
Source
Workday

Description

Date Posted:

2026-10-29

Country:

United States of America

Location:

US-MA-ANDOVER-AN2 ~ 352 Lowell St ~ AN2 HAMPSHIRE BLDG

Position Role Type:

Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

The ability to obtain and maintain a U.S. government issued security clearance is required.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Security Clearance Type:

DoD Clearance: Secret

Security Clearance Status:

Active and existing security clearance required after day 1

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.


We are seeking a 2nd shift Operations Quality Engineer with hands-on hardware quality experience to become a key part of the Sensors Operations Quality organization. Here at Raytheon, our Operations Quality Team assures product and process quality with an emphasis on Product Compliance, Customer Satisfaction and Continuous Improvement.


This position is for 2nd shift and the hours are 1:00pm to 10:30pm and will include an 8% shift differential.


What You Will Do:

  • Baseline factory metrics (Scrap, Rework, FPY, etc.), identify top drivers, forecast future demand for top drivers and identify areas of opportunity for improvement.
  • Engage MFG Defect Prevention teams to ensure alignment on top priorities (using baseline data and future forecast) to drive containment, Root Cause Analysis and associated Corrective Action Implementation.
  • Perform process walks, operator observations, and lead MFG team discussions to drive process enhancements to reduce variation.
  • Lead/Drive Advanced Product Quality Planning (APQP) initiatives (PFMEA, control Plans, SPC, etc.) using baseline metrics and future demand.
  • Identify supplier escapes/issues and ensure proper containment and backflow to the Supplier Quality Management team.
  • Perform verification and validation of improvements to understand effectiveness.
  • Expectations of the role:
  • Demonstrated knowledge of key process characteristics and ability to implement effective process control techniques.
  • Experience with industry technical standards, interpreting drawings, work instructions, Bill of Materials (BOMs), consumable materials control, process disciplines and tool control
  • Strong familiarity with ISO 9001 and/or AS9100 quality management systems
  • Proficient in the use of pareto analysis, cause/effect diagrams, process mapping
  • Able to facilitate cross-functional teams in systematic improvement activities (e.g. Six-sigma, lean manufacturing)

Qualifications You Must Have:

  • Typically requires a Bachelor’s in Science, Technology, Engineering, or Mathematics (STEM) or other technical field of study, and a minimum of two (2) years related engineering experience
  • Manufacturing process experience in one of the following processes (assembly, inspection, test)
  • Previous experience working in cross functional process improvement teams.
  • Experience in identifying root cause and initiating/implementing effective short-term and long-term corrective actions
  • Experience with quality metrics that may be used to drive true root cause and long-term corrective actions.
  • The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer:

  • Demonstrated knowledge of key process characteristics and ability to implement effective process control techniques.
  • Experience with industry technical standards, interpreting drawings, work instructions, Bill of Materials (BOMs), consumable materials control, process disciplines and tool control
  • Strong familiarity with ISO 9001 and/or AS9100 quality management systems
  • Six Sigma, ASQ Certifications
  • Proficient in the use of pareto analysis, cause/effect diagrams, process mapping
  • Able to facilitate cross-functional teams in systematic improvement activities (e.g. Six-sigma, lean manufacturing)
  • Existing US DoD Secret (or higher) clearance

Learn More and Apply!!



This is an on-site position in Andover, MA and does not provide relocation assistance.


Please ensure the role type defined below is appropriate for your needs before applying to this role. This position is classified as:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.


Clearance Information: This position requires the eligibility to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: https://www.state.gov/m/ds/clearances/c10978.htm




As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 75,800 USD - 144,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.

Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.

Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.

This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.

RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Skills

Lean ManufacturingComplianceSix Sigma

Similar Jobs

30

Warehouse Associate 2nd shift

BFC Solutions·Nashville, Tennessee·Onsite

Today

Resort Maintenance Technician (Full-Time) | 2nd Shift | *Sign on Bonus*

Delavan Holdings·Delavan, Wisconsin

Today

Welder - 2nd Shift

Prolec GE Waukesha·Waukesha, Wisconsin

Today

Quality Control Lead - 2nd Shift

Grower Direct Nut Company, Inc·Hughson, CA

Today

Part-Time 2nd Shift Caregiver - The Courtyard at Delta

Encore Senior Living·Lansing, Michigan

Today

Multi-Craft Maintenance Technician - 2nd Shift (Onboarding on 1st Shift)

Spot & Tango·Allentown, Pennsylvania

2nd Shift General Cleaner

Allegiance Industries·019273 - Wilson, NC 27893

2nd Shift Floor Technician

Allegiance Industries·024112 - Hampton, VA 23661

2nd Shift Weekend Cleaner

Allegiance Industries·019273 - Wilson, NC 27893

2nd Shift General Cleaner

Allegiance Industries·024112 - Hampton, VA 23661

CNA, 2nd shift FT, Franklin Country View Nursing Facility

FRANKLIN GENERAL HOSPITAL·Hampton, Iowa·Onsite

CNC Operator - 2nd Shift

3-Dimensional Services Group·UDM - Lapeer, MI 48446

2nd Shift Assistant Supervisor

The Class Produce Group·Jessup, Maryland

Today

BHT Shift Supervisor - FT 2nd Shift (35636)

ODYSSEY BEHAVIORAL GROUP·Deerfield Beach, Florida

Order Selector Forklift Operator | 2nd Shift

RJ Schinner Co·Bethlehem, Pennsylvania

Today

Production 2nd Shift

Prairie Farms Dairy·Carbondale, Illinois

Today

Production 2nd Shift

Prairie Farms Dairy·Carbondale, Illinois

Today

2nd Shift Maintenance Mechanic

JBS USA Holdings

Grounds Keeper 2nd Shift

JBS USA Holdings

Sanitation Worker 2nd Shift

JBS USA Holdings

2nd Shift Quality Assurance Technician

VP Racing·McKenzie, Tennessee

Today

2nd Shift Production Laborer

HANOVER FOODS CORPORATION·Pennsylvania, US

Logistics Operator 2nd Shift

Fuyao Glass America·Moraine, Ohio

Today

Senior Material Handler (2nd Shift) - Rialto CA

APL Logistics·Rialto, California·Onsite

Today

2nd Shift Floor Technician

Allegiance Industries·024112 - Hampton, VA 23661

2nd Shift General Cleaner

Allegiance Industries·024112 - Hampton, VA 23661

2nd Shift Weekend Cleaner

Allegiance Industries·019273 - Wilson, NC 27893

2nd Shift General Cleaner

Allegiance Industries·019273 - Wilson, NC 27893

MGH-Gen Maintenance Mechanic A - 2nd Shift - $2,500 - Signing Bonus

Rheem·Montgomery, Alabama

Today

Line Operator - 2nd Shift

Cremer·Cincinnati, Ohio

Today