Hiring.Camp

Modeling & Simulation Engineer III

Oshkoshcorporation

·

Today

Salary
$104k – $174k/yr
Location
US-NC-Huntersville, United States of America
Type
Full-time
Department
Engineering
Experience
5+ years
Source
Workday

Description

About Pratt Miller, an Oshkosh company

Pratt Miller is a product development company in motorsports, defense, and mobility industries providing clients with product engineering and low-volume production solutions. Our range of research & development, engineering, prototype manufacturing, test & validation, and low-rate production capability help our customers bring their high-quality products to market faster.

The Modeling and Simulation Engineer III will support product development through the integration of simulation tools. This role will define and validate system-level requirements of mechanical systems, develop and execute simulation plans, correlate virtual models with physical test data, and assess system performance against program objectives.


ESSENTIAL FUNCTIONS AND SKILLS: Typical responsibilities include but are not limited to the following:


  • Lead development and performance analysis of programs using virtual analysis workflows and co-simulation tools to meet technical requirements and program timing.
  • Drive innovation in virtual simulation tools and methods.
  • Architect, develop and execute virtual models capable of integrating hardware and software for a wide variety of mechanical systems.
  • Develop and integrate multi-physics simulation tools (multi-body dynamics, 1-D hydraulics, controls, etc) to calibrate and validate software and hardware.
  • Create and deploy functional mock-up units, FMUs, and other reduced-order or interface models for use by cross-functional teams.
  • Develop durability requirements, load cases, acceptance criteria, and verification plans for components and systems.
  • Build, run, and correlate rigid and flexible multibody dynamics models to predict loads, damage, motions, and other performance metrics.
  • Work cross-functionally with design, test, materials, and systems teams to improve durability performance and close gaps between requirements, analysis, and validation.
  • Document assumptions, methods, correlation results, and engineering recommendations.
  • Generate clear, concise technical reports and effectively communicate findings to internal teams and customers
  • Operate effectively in a dynamic, fast-paced environment while driving progress across multidisciplinary teams

ADDITIONAL REQUIREMENTS: In addition to the responsibilities mentioned above, tasks relating to the following area will be assigned as required.


  • Ability to work effectively in a collaborative, team-oriented environment
  • Strong time management and organizational skills
  • Effective communication across multiple platforms (Microsoft Teams, email, phone, messaging)
  • Reliable transportation and consistent attendance
  • Demonstrated strong work ethic and accountability for deliverables
  • Commitment to quality and continuous improvement

EDUCATION/CERTIFICATION/YEARS OF EXPERIENCE:

  • Bachelor’s or Master’s degree in Mechanical Engineering or related field.
  • 5+ years of experience with simulation tools and co-simulation.

SPECIALIZED SKILLS AND KNOWLEDGE:

  • Hands-on experience with one or more MBD tools such as Adams, MotionSolve, Simscape Multibody, Simpack, or equivalent.
  • Working knowledge of 1-D simulation tools (Simscape, Dymola, AmeSim)
  • Proficiency in Python, C++, CLI or similar tools
  • Understanding of control systems.
  • Experience with Matlab and Simulink
  • Knowledge of Desing of Experiments (DOE) methods, and data interpretation.
  • Ability to process and analyze test data using signal-processing techniques.
  • Knowledge of data acquisition (DAQ) systems and mechanical system instrumentation.
  • Capability to work independently with limited supervision
  • Demonstrated ability to identify and recommend improvements to engineering processes and workflows
  • Strong analytical thinking and problem-solving skills

PHYSICAL DEMANDS:

  • Up to 20% travel required (domestic and international)
  • Hands-on involvement with test hardware, including installation and adjustments in shop or wind tunnel environments
  • Ability to lift and move components or equipment up to 50 lbs.

EXPECTED HOURS OF WORK:

  • Typical start time between 7:00 AM – 8:00 AM, Monday through Friday
  • Flexibility required to meet project deadlines, including occasional weekend work

Pay Range:

$104,100.00 - $173,900.00

The above pay range reflects the minimum and maximum target pay for the position across all U.S. locations. Within this range, individual pay is determined by various factors, including the scope and responsibilities of the role, the candidate's experience, education and skills, as well as the equity of pay among team members in similar positions. Beyond offering a competitive total rewards package, we prioritize a people-first culture and offer various opportunities to support team member growth and success.

Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email [email protected].

Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To the extent that information is provided or collected regarding categories as provided by law it will in no way affect the decision regarding an employment application.

Oshkosh Corporation will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Oshkosh Corporation's legal duty to furnish information.

Certain positions with Oshkosh Corporation require access to controlled goods and technologies subject to the International Traffic in Arms Regulations or the Export Administration Regulations. Applicants for these positions may need to be "U.S. Persons," as defined in these regulations. Generally, a "U.S. Person" is a U.S. citizen, lawful permanent resident, or an individual who has been admitted as a refugee or granted asylum.

Skills

Python

Similar Jobs

30

Systems Engineer — Modeling & Simulation

Vermeer·Pella, Iowa·Hybrid

Today

Simulation Modeling Engineer II

Allisontransmission·US

1d ago

Senior Modeling & Simulation Engineer: Power Systems

Mainspringenergy·California, US·Remote

3d ago

Senior Modeling & Simulation Engineer, HIL & Training Simulator Systems

Regent·North Kingstown, Rhode Island

3d ago

Senior Director of Quantitative Pharmacology Modeling & Simulation

Amgen is committed to unlocking·California, US +1·Hybrid

4d ago

Sentinel - Sr Principal Systems Engineer - Modeling Simulation & Analysis

Northrop Grumman·US

4d ago

Principal Controls and Modeling & Simulation - Responsible Engineer/Sr. Principal Controls and Modeling & Simulation - Responsible Engineer

Northrop Grumman·US

4d ago

Principal Controls and Modeling & Simulation - Responsible Engineer/Sr. Principal Controls and Modeling & Simulation - Responsible Engineer

Northrop Grumman·El Segundo, California +2

4d ago

Sentinel - Sr Principal Systems Engineer - Modeling Simulation & Analysis

Northrop Grumman·Roy, Utah

4d ago

Engineer, Modeling & Simulation

Tranetechnologies·China·Onsite

4d ago

Packaging Modeling & Simulation Junior Technologist

Danone·The Netherlands·Hybrid

4d ago

Modeling & Simulation Engineer and Data Analyst

Modern Technology Solutions Inc·Wright-Patterson AFB, Ohio

5d ago

Modeling & Simulation Engineer, Missiles

CHAOS Industries·El Segundo, California +1

5d ago

Modeling & Simulation Systems Engineer

Northrop Grumman·Rolling Meadows, Illinois·Onsite

5d ago

Principal/Sr. Principal Modeling & Simulation Systems Engineer

Northrop Grumman·Rolling Meadows, Illinois·Onsite

5d ago

Modeling & Simulation Systems Engineer

Northrop Grumman·US·Onsite

5d ago

Principal/Sr. Principal Modeling & Simulation Systems Engineer

Northrop Grumman·US·Onsite

5d ago

Systems Engineer / Principal Systems Engineer - Modeling & Simulation

Northrop Grumman·US

5d ago

Space Architecture Performance Modeling & Simulation Specialist

Aero·Chantilly, Virginia +2·Remote, Onsite

5d ago

Systems Engineer II - Modeling Simulation & Analysis Engineer

RTX·Tucson, Arizona·Onsite

5d ago

Principal Systems Engineer - Modeling Simulation & Analysis Engineer

RTX·Tucson, Arizona·Onsite

5d ago

Sr. Systems Engineer - Modeling Simulation & Analysis Engineer

RTX·Tucson, Arizona·Onsite

5d ago

Systems Engineer / Principal Systems Engineer - Modeling & Simulation

Northrop Grumman·Rolling Meadows, Illinois

5d ago

Intern, Aviation Modeling & Simulation (Summer 2027)

Woolpert·Fort Worth, Texas +1·Remote, Onsite

6d ago

Scientist I / Scientist II / Senior Scientist, DMPK (Modeling & Simulation)

Vividion Therapeutics, Inc·San Diego, California

6d ago

Sentinel Systems Engineering Manager 2– Modeling Simulation and Analysis - 20725

Northrop Grumman·Roy, Utah

6d ago

Futures - Modeling Simulation and Analysis Systems Engineer - *18987

Northrop Grumman·US

6d ago

Sentinel Systems Engineering Manager 2– Modeling Simulation and Analysis - 20725

Northrop Grumman·US

6d ago

Futures - Modeling Simulation and Analysis Systems Engineer - *18987

Northrop Grumman·Roy, Utah

6d ago

MEO Missile Warning & Tracking (MWT) Modeling & Simulation (M&S) Engineer

Aero·Colorado Springs, Colorado +1·Onsite

1w ago