Hiring.Camp

Field Service Engineer - Genset Support

Rollsroyce

·

Today

Location
(RRPS) PUNE - ESAS, India
Type
Full-time
Department
Engineering
Seniority
Mid
Source
Workday

Description

Job Description

Job Title: Field Service Engineer - Genset Support

Years of Experience: 3 to 10 years

Education: ITI / Diploma in electrical / electronics

Location: Pune

 

Why Rolls-Royce?

At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere.

By joining Rolls-Royce, you'll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture.

 

Summary

The Genset Support Engineer is responsible for providing comprehensive electrical and mechanical troubleshooting, preventive-maintenance, breakdown-maintenance, and technical support for commissioned diesel generator sets (DG/Gensets) installed at customer sites, including Balance of Plant (BoP).
The primary responsibility of this position is to ensure that commissioned gensets remain safe, reliable, efficient, and operational, while minimizing equipment downtime and ensuring timely resolution of electrical and mechanical issues.
The engineer will act as the key technical interface between the company, customers, service teams, vendors, and other stakeholders for all post-commissioning genset-related requirements.


Key Responsibilities

  • Genset Electrical Support

Provide complete electrical troubleshooting and technical support for commissioned gensets, including:

  • Troubleshoot electrical faults in DG sets, control panels synchronization panels, and associated systems.
  • Diagnose problems related to:
    • Generator alternators
    • AVR systems
    • Excitation systems
    • Generator protection systems
    • Battery charging systems
    • Starting circuits
    • DC control circuits
    • AC output circuits
    • Control modules and controllers
    • Sensors and transmitters
    • CTs/PTs
    • Relays and contactors
    • Circuit breakers
    • Emergency stop circuits
    • MCCBs/ACBs
    • Wiring and termination
  • Troubleshoot starting failures, failure-to-start conditions, nuisance trips, shutdown alarms, and abnormal electrical readings.
  • Check and rectify issues related to low/high voltage, low/high frequency, phase imbalance, voltage fluctuations, reverse power, overload, earth fault, overcurrent, and other protection trips.
  • Carry out testing of alternator insulation resistance, winding resistance, continuity, and related electrical parameters.
  • Verify proper operation of generator protection and monitoring systems.
  • Troubleshoot battery, charger, starter motor, and associated DC electrical systems.
  • Inspect electrical connections, cable terminations, busbars, glands, earthing, and control wiring.
  • Identify loose connections, overheating points, insulation deterioration, cable damage, and other electrical defects.
  • Support testing and troubleshooting of generator synchronization and load-sharing systems.
  • Support troubleshooting of multiple-genset parallel operation.
  • Verify phase sequence, voltage, frequency, and synchronization parameters.
  • Interface with OEMs and specialist vendors for controller, alternator, AVR, and electrical protection-related issues.

2. Genset Mechanical Support

Provide complete mechanical troubleshooting and maintenance support for commissioned gensets, including:

  • Diagnose engine-related faults and performance issues.
  • Troubleshoot problems associated with:
    • Engine starting
    • Excessive vibration
    • Abnormal noise
    • High coolant temperature
    • Low/high oil pressure
    • Excessive smoke
    • Poor engine performance
    • Excessive fuel consumption
    • Low engine RPM
    • Overspeed
    • Engine hunting
    • Coolant leakage
    • Oil leakage
    • Fuel leakage
    • Exhaust leakage
  • Inspect and troubleshoot cooling systems, including radiators, cooling fans, thermostats, coolant pumps, hoses, and expansion tanks.
  • Inspect lubrication systems, including engine oil, oil filters, oil pumps, and related components.
  • Inspect and troubleshoot fuel systems, including fuel pumps, injectors, filters, fuel lines, and fuel tanks.
  • Inspect exhaust systems for blockages, leakage, excessive back pressure, and abnormal conditions.
  • Check engine belts, pulleys, couplings, mounts, hoses, and mechanical fasteners.
  • Identify and rectify abnormal vibration and alignment-related issues.
  • Check engine-generator coupling and mounting conditions.
  • Support major and minor engine maintenance activities as required.
  • Carry out replacement of defective mechanical components within the engineer's technical competency.
  • Coordinate with OEM/service specialists for major engine overhauls and specialized repairs.

3. Preventive Maintenance

Carry out and/or supervise scheduled preventive maintenance activities for commissioned gensets.

Responsibilities include:

  • Follow manufacturer-recommended preventive-maintenance schedules.
  • Conduct periodic inspection of gensets and associated systems.
  • Check engine oil level and condition.
  • Inspect and replace oil, fuel, and air filters as required.
  • Check coolant level and condition.
  • Inspect radiator and cooling system.
  • Check battery condition, electrolyte where applicable, terminal connections, and charging voltage.
  • Inspect belts, hoses, clamps, and mechanical connections.
  • Check fuel system for leakage and contamination.
  • Inspect exhaust system.
  • Check generator output voltage, current, frequency, and load.
  • Check control-panel alarms and indications.
  • Inspect electrical connections and cable terminations.
  • Check earthing and bonding.
  • Check emergency-stop functionality.
  • Verify operation of safety and protection systems.
  • Conduct no-load and load testing as required.
  • Record all preventive-maintenance observations and corrective actions.

4. Breakdown and Emergency Support

The engineer will provide timely technical support during genset breakdowns and emergency situations.

Key responsibilities include:

  • Attend customer breakdown calls within the defined service response time.
  • Quickly assess the equipment condition and identify the root cause of failure.
  • Carry out systematic electrical and mechanical troubleshooting.
  • Restore the genset to operational condition at the earliest possible time.
  • Prioritize safety-critical and business-critical breakdowns.
  • Coordinate with service technicians, spare-parts teams, vendors, and OEM specialists.
  • Identify parts required for repair and communicate requirements to the concerned teams.
  • Provide temporary/alternative solutions where appropriate to minimize customer downtime.
  • Escalate major or recurring failures to the Service Manager/Technical Team.
  • Maintain complete records of breakdowns, corrective actions, and pending issues.

5. Troubleshooting and Root Cause Analysis

A major responsibility of the role is to identify the actual root cause rather than merely replacing defective components.

The engineer shall:

  • Analyze fault codes, alarms, operating parameters, and historical data.
  • Review previous service records to identify recurring problems.
  • Perform systematic electrical and mechanical diagnosis.
  • Conduct root-cause analysis (RCA) for major or repeated failures.
  • Recommend permanent corrective actions.
  • Identify operational, installation, maintenance, or component-related causes.
  • Prepare technical failure reports where required.
  • Recommend design or installation improvements to prevent recurrence.

6. Load Testing and Performance Monitoring

The engineer shall support performance testing of commissioned gensets, including:

  • No-load testing.
  • Partial-load testing.
  • Full-load testing.
  • Load-bank testing where required.
  • Monitoring voltage, current, frequency, power factor, kW and kVA.
  • Monitoring engine parameters such as coolant temperature, oil pressure, RPM, and fuel consumption.
  • Monitoring exhaust and operating conditions.
  • Checking load balance across phases.
  • Verifying genset performance against specified ratings.
  • Identifying abnormal performance trends.
  • Preparing load-test and performance reports.

7. AMF, ATS and Synchronization Support

Where applicable, the engineer will support:

  • AMF panel troubleshooting.
  • Automatic start/stop functionality.
  • Mains failure and mains restoration logic.
  • Auto/manual mode troubleshooting.
  • ATS operation and interlocking.
  • Generator breaker operation.
  • Mains breaker operation.
  • Generator-to-generator synchronization.
  • Generator-to-mains synchronization.
  • Load sharing.
  • kW/kVAR sharing.
  • Synchronizing relay/controller configuration.
  • Troubleshooting communication between gensets and controllers.
  • Testing emergency and safety interlocks.

8. Genset Controllers and Electronic Systems

The engineer should be capable of working with modern electronic genset control systems.

Responsibilities include:

  • Reading and interpreting controller alarms and fault codes.
  • Checking engine and generator parameters through the controller.
  • Diagnosing sensor-related faults.
  • Checking communication between controller and engine ECU.
  • Supporting controller configuration and parameter verification.
  • Uploading/downloading controller configuration where authorized.
  • Maintaining backup copies of configuration files where applicable.
  • Supporting firmware/software updates through authorized procedures.
  • Coordinating with OEM technical support for controller-related problems.
  • Maintaining records of controller settings and modifications.

9. Customer Support

The engineer will serve as a technical point of contact for customers after genset commissioning.

Responsibilities include:

  • Understand customer complaints and operational requirements.
  • Attend customer sites and diagnose problems.
  • Explain technical issues and corrective actions clearly to customers.
  • Provide operating and maintenance guidance.
  • Advise customers regarding recommended preventive maintenance.
  • Educate customer operators on correct genset operation.
  • Advise customers on loading, operating parameters, and safe operating practices.
  • Handle customer technical queries professionally.
  • Ensure customer satisfaction through timely and effective technical resolution.
  • Identify opportunities for additional service, maintenance, refurbishment, or replacement requirements and communicate them to the relevant commercial team.

10. Site Inspection and Technical Audits

Conduct periodic technical inspections of installed/commissioned gensets.

The inspection should cover:

  • Engine condition.
  • Alternator condition.
  • Control panel.
  • AMF/ATS system.
  • Synchronization system.
  • Fuel system.
  • Exhaust system.
  • Cooling system.
  • Battery and charger.
  • Earthing system.
  • Cabling and terminations.
  • Room ventilation.
  • Air intake and exhaust arrangements.
  • Foundation and anti-vibration arrangements.
  • Load profile.
  • Operating environment.
  • Safety systems.
  • General housekeeping.

Identify deficiencies and prepare a detailed site-inspection report with recommendations.

11. Service Documentation and Reporting

Maintain accurate technical documentation for every service activity.

Reports should include:

  • Customer/site details.
  • Genset model and rating.
  • Engine and alternator details.
  • Running hours.
  • Complaint description.
  • Fault/alarm information.
  • Diagnostic findings.
  • Electrical measurements.
  • Mechanical measurements.
  • Root cause.
  • Corrective action.
  • Parts replaced.
  • Parts required.
  • Recommendations.
  • Pending actions.
  • Customer remarks/acceptance.

Prepare:

  • Service reports.
  • Breakdown reports.
  • Preventive-maintenance reports.
  • Inspection reports.
  • Load-test reports.
  • Root-cause-analysis reports.
  • Warranty reports.
  • Technical recommendations.
  • Service completion reports.

12. Spare Parts and Inventory Support

The engineer shall assist in identifying and managing technical spare requirements.

Responsibilities include:

  • Identify defective components.
  • Determine correct replacement parts.
  • Prepare spare-parts requirements.
  • Verify part numbers and specifications.
  • Recommend critical spare parts for customers.
  • Maintain awareness of commonly failing components.
  • Coordinate with stores/procurement for urgent spare requirements.
  • Verify received parts before installation.
  • Report incorrect or defective supplied parts.

13. Warranty Support

Where applicable, support warranty-related activities by:

  • Identifying whether a failure is potentially warranty-related.
  • Collecting required technical evidence.
  • Recording operating conditions and failure symptoms.
  • Taking photographs and measurements where required.
  • Preparing warranty failure reports.
  • Coordinating with OEMs and suppliers.
  • Supporting inspection of failed components.
  • Ensuring warranty claims are supported by appropriate documentation.
  • Tracking warranty corrective actions until closure.

14. Safety Responsibilities

The engineer must strictly follow all applicable electrical, mechanical, and site-safety requirements.

Responsibilities include:

  • Follow Lockout/Tagout (LOTO) procedures.
  • Ensure equipment is isolated before maintenance.
  • Use appropriate PPE.
  • Follow electrical safety procedures.
  • Follow safe fuel-handling practices.
  • Follow safe battery-handling procedures.
  • Ensure proper earthing before testing.
  • Avoid unsafe operation of rotating machinery.
  • Ensure guards and protective covers are properly installed.
  • Report unsafe site conditions.
  • Stop work when an unsafe condition presents an unacceptable risk.
  • Follow customer and company HSE procedures.

15. Coordination and Escalation

The engineer will coordinate with:

  • Service technicians.
  • Service managers.
  • Project/commissioning teams.
  • Electrical engineers.
  • Mechanical engineers.
  • Design engineering teams.
  • Spare-parts teams.
  • Procurement.
  • OEM representatives.
  • Panel manufacturers.
  • Alternator manufacturers.
  • Customers and facility-management teams.

Complex or recurring issues should be escalated with a clear technical diagnosis and supporting data.

 

Power Systems is the Rolls-Royce business which provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalisation and electrification, we strive to develop drive and power generation solutions that provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility.

We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These technologically advanced solutions serve our customers in the marine and infrastructure sectors worldwide.

 

Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too.

Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive.


Type of Contract

Permanent

Skills

HousekeepingProcurement

Similar Jobs

30

FIELD SERVICE ENGINEER

Aegps·-, Singapore·Onsite

Today

FIELD SERVICE ENGINEER

Aegps·Rayong, Thailand·Onsite

Today

Field Service Engineer

Gevernova·Seoul, Korea

Today

Field Service Engineer

The Waters·Shandong 山东省, CN

Today

Field Service Engineer

Gevernova·Seoul, South Korea

Today

Field Service Engineer

International Waters·Shandong 山东省, CN

Today

Field Service Engineer

Agilent·Japan-Remote Location·Onsite

Today

Field Service Engineer

Kiongroup·Burgos, Castille and León·Onsite

Today

Field Service Engineer

SOSi·Joint Base Pearl Harbor Hickam, Hawaii·Onsite

2d ago

Field Service Engineer

Trumpf·Plymouth, Michigan

3d ago

Field Service Engineer

Haier company·UK

3d ago

Field Service Engineer

Haier company·UK

3d ago

Field Service Engineer

Asml·Xian ASML office, China

3d ago

Field Service Engineer

Thermofisher·Singapore·Onsite

3d ago

Field Service Engineer

Kiongroup·Basingstoke, England +5·Hybrid

3d ago

Field Service Engineer

Thermofisher·Taiwan·Hybrid

3d ago

Field Service Engineer

Veralto·US·Remote

4d ago

Field Service Engineer

HiNext·Mexico·Hybrid

4d ago

Field Service Engineer

Jbtm·Amsterdam, North Holland +12·Hybrid

4d ago

Field Service Engineer

Find a job at GEA·Colombia·Onsite

4d ago

Field Service Engineer

Broetje Automation·Charleston, South Carolina

4d ago

Field Service Engineer

Broetje Automation·Everett, Washington

4d ago

Field Service Engineer

Broetje Automation·Wichita, Kansas

4d ago

Field Service Engineer

Abb·Ireland·Remote

4d ago

Field Service Engineer

Kiongroup·Basingstoke, England

4d ago

Field Service Engineer

Haier company·UK

4d ago

Field Service Engineer

Haier company·UK

4d ago

Field Service Engineer

Jbtm·Middletown, Ohio·Remote

4d ago

Field service engineer

Alfalaval·Singapore

4d ago

Field Service Engineer

Kendall Howard·Texas, US·Onsite

4d ago