Maintenance Assistant x 2
BSi Steel Group of Companies
·Today
- Location
- Meyerton, GP, ZA
- Type
- Full-time
- Department
- Operations
- Source
- Breezy HR
Description
RELEVANT EXPERIENCE:
- Minimum 3–5 years’ experience in general industrial maintenance, preferably in steel processing, manufacturing or heavy engineering.
- Practical experience assisting qualified artisans with breakdowns, mechanical repairs, planned maintenance and machine inspections.
- Experience with lubrication, grease systems, hydraulic oil levels, compressors, cranes and material handling equipment is advantageous.
- Experience in DMS or a computerised maintenance management system will be advantageous.
MINIMUM QUALIFICATION:
- Matric / Grade 12.
- Relevant N2/N3 Mechanical Engineering or technical training certificate will be advantageous.
- Basic computer literacy; ability to complete electronic maintenance job cards.
- Training in lockout, working at heights, lifting and use of hand/power tools will be advantageous.
BEHAVIOURAL SKILLS:
- Hardworking, punctual, honest, reliable, disciplined and safety conscious.
- Able to follow instructions, work in a team and support qualified artisans effectively.
- Good communication, attention to detail, time management and reporting skills.
- Proactive in identifying and reporting defects, hazards and stock shortages.
- Willing to work overtime, shifts or planned shutdowns when required.
- Physically capable of factory maintenance duties and authorised work at heights.
TECHNICAL SKILLS:
- Knowledge of greasing, machine lubrication, gearbox oils, hydraulic reservoirs and automatic lubrication pumps.
- Basic knowledge of bearings, couplings, chains, belts, sprockets, rollers and mechanical drives.
- Ability to safely use hand tools, grinders, drills, measuring tools and workshop equipment.
- Basic familiarity with hydraulic and pneumatic systems, compressors, air dryers and filters.
- Basic understanding of safe lifting, rigging, machine guards, isolation and lockout/tagout.
- Ability to interpret basic drawings, work instructions and maintenance schedules.
- Accurate maintenance recording in DMS, including work completed, findings and outstanding defects.
BRIEF JOB DESCRIPTION AND PRIMARY FUNCTION OF THE POSITION:
The successful applicant will support qualified millwrights and maintenance personnel with safe preventative maintenance, lubrication, inspections, breakdown assistance, general plant upkeep and accurate DMS records to improve equipment reliability and production uptime. The role is an assistant position: specialised electrical, rigging and independent repair work must only be carried out by authorised competent personnel.
The successful applicant would be responsible for, but not limited to:
- Carry out daily assigned maintenance duties and inspections under the direction of the Millwright / Maintenance Supervisor.
- Assist with repair, dismantling, cleaning, reassembly, adjustment and replacement of basic mechanical parts.
- Inspect machinery for abnormal noise, vibration, overheating, leaks, loose components and damaged guards; report defects immediately.
- Perform planned greasing and lubrication strictly to the approved machine schedule and lubricant specification.
- Grease Slitter 01 and Slitter 02 during approved setups, and RBI CTL, Schnutz CTL and Lip Channel 01/02 during suitable approved production breaks where safe.
- Inspect, grease and maintain transfer cars and coil grabs during authorised downtime, not during lunch-break-only task windows.
- Check and maintain designated compressor, hydraulic oil and gearbox lubricant levels and inspect automatic grease pumps.
- Avoid overgreasing; clean nipples and remove old or excess grease after lubrication.
- Monitor stock of oils, grease, filters and consumables and report shortages before supplies run out.
- Assist artisans with breakdowns, shutdowns, machine relocations and authorised lifting operations.
- Inspect hydraulic hoses, pneumatic lines, fittings, filters and condensate drains visually; report leaks and abnormal conditions.
- Maintain workshop tools, spare parts, lubrication equipment, housekeeping and proper disposal of waste.
- Assist with minor facilities work, painting, repairs and factory upkeep when assigned.
- Capture all completed work and defects on the correct DMS job cards before the end of each working day.
- Comply with PPE, lockout, permit-to-work, machine guarding and all company safety requirements.
KEY PERFORMANCE AREAS:
The successful applicant would be responsible for, but not limited to:
Maintenance Process (Scheduled Preventative Maintenance):
- Complete 100% of allocated daily, weekly and monthly preventative tasks or promptly report any exception.
- Carry out lubrication and grease inspections according to approved frequency and safe access windows.
- Check lubricants, hydraulic systems, compressor levels and automatic grease pump levels; prevent overgreasing.
- Inspect guards, visible machine condition and maintenance tooling; identify defects and spares requirements.
- Capture accurate DMS planned maintenance records before shift end.
Maintenance Process (Breakdown):
- Respond promptly to instructions from the responsible artisan and prepare needed tools, spares and work area.
- Assist with basic mechanical removal, cleaning, fitting and assembly under supervision.
- Communicate abnormal findings, safety risks, delays and outstanding work promptly.
- Record assigned breakdown assistance and parts used accurately in DMS.
Mechanical Maintenance and Lubrication:
- Assist with inspection or replacement of bearings, chains, sprockets, belts, rollers, couplings and related parts.
- Check designated lubricant reservoirs, levels, grease systems and visible signs of mechanical wear.
- Assist with maintenance of slitting, cut-to-length, lip-channel and roll-forming lines.
- Assist qualified personnel on cranes, hoists, coil grabs, transfer cars and other plant equipment only under authorised procedures.
Workshop, Spares and Housekeeping:
- Clean, inspect, secure and account for tools after each job.
- Keep workshop and work areas clean, organised and free of hazards.
- Report low lubricant, filter and critical consumable stock before shortages arise.
- Use company materials responsibly and handle waste as required.
Maintenance Process (Post Maintenance):
- Clean work areas and return tools and surplus materials after every job.
- Assist the artisan with verifying guards and safe equipment handover prior to restart.
- Report incomplete tasks and outstanding defects to the responsible artisan.
- Complete and update all allocated DMS job cards daily with correct information.
Health, Safety and Environmental Compliance:
- Observe approved isolation, lockout/tagout, permits and PPE rules at all times.
- Never bypass guards, enter hazardous areas or carry out electrical tasks without proper authorisation.
- Use cranes, jacks, lifting platforms and rigging equipment only when trained and authorised.
- Promptly report near misses, unsafe conditions and equipment hazards.
KEY PERFORMANCE EXPECTATIONS:
- 100% of allocated tasks completed on time or exceptions reported; 100% DMS capture by end of each shift.
- 100% scheduled lubrication compliance with correct lubricant and no avoidable overgreasing.
- Daily inspections and immediate escalation of defects, hazards and lubricant stock shortages.
- Safe workmanship, effective artisan support, clean workshop and full accountability for allocated tools.
SELECTION PROCESS:
- Shortlisted candidates may undergo a practical assessment covering lubrication, mechanical components, safe tool use, equipment inspection and DMS job card completion.