Senior Embedded Systems Engineer (Electrical / Firmware)
Skyline Products
·Yesterday
- Salary
- $110k – $140k/yr
- Location
- Colorado Springs, CO
- Workplace
- Hybrid
- Type
- Full-time
- Department
- Engineering
- Seniority
- Senior
- Closing date
- Today
- Source
- ApplyToJob
Description
Skyline Products
Location: Colorado Springs, CO
Job Type: Full-Time
Reports To: Director of Engineering
Salary Range: $110,000. To $140,000. Annually
Travel: Up to 10% for field visits to customer sites and contract manufacturers
Industry: Transportation / Intelligent Transportation Systems (ITS)
This role sits squarely at the intersection of hardware and software. You’ll develop firmware for bare-metal microcontrollers and embedded Linux controllers, contribute to circuit and PCB design, and serve as a go-to engineer for problems that don’t stay neatly on one side of the hardware/software line, from a dead pixel on the bench to an intermittent communication fault on a sign mounted to an overpass. The ideal candidate is a methodical troubleshooter who is equally comfortable with a scope probe, a schematic, and a debugger, and who doesn’t consider a problem closed until the root cause is proven.
- Lead root-cause investigations of field, production, and lab failures that span firmware, circuitry, components, PCB assembly, cabling/connectors, and environmental stress (heat, vibration, moisture), and drive them to verified corrective action
- Design, develop, and maintain embedded firmware in C/C++ on bare-metal microcontrollers (e.g., PIC, STM32/ARM Cortex-M) and RTOS-based platforms
- Build and maintain embedded Linux applications and system configuration on sign controllers, including networking, security hardening, storage, and boot configuration
- Contribute to and maintain existing, long-lived codebases, ensuring stability, clarity, and documentation
- Participate in electronic hardware design: schematic review, PCB layout review, component selection, and board bring-up
- Develop and tune RGB LED color mixing: per-color current and PWM balancing, white-point and color-matching across LED bins, and brightness/color consistency over temperature and dimming levels
- Evaluate and qualify components for long-life outdoor deployment (microcontrollers, LED drivers, LEDs, connectors, power and storage devices), including replacements for obsolete or unavailable parts
- Design and build test fixtures, automated test rigs, and lab tools (Python plus instrumentation) to reproduce intermittent failures and validate fixes
- Debug hardware/software issues using oscilloscopes, logic and protocol analyzers, JTAG/SWD debuggers, and other bench instruments
- Support production, contract manufacturers, and field service with failure analysis, pre-installation sign inspections, and on-site troubleshooting when needed
- Design systems with long-term reliability, diagnostics, and field maintainability in mind
- Ensure compliance with transportation and industry standards (e.g., NTCIP, NEMA TS 4) for robustness and safety
- Write and maintain technical documentation, including design documents, test procedures, failure analysis reports, and controlled quality documents
- Bachelor’s degree in Electrical Engineering (preferred) or Computer Engineering; Master’s a plus
- 5+ years of combined embedded hardware and firmware development experience
- Demonstrated, systematic troubleshooting ability across the hardware/software boundary: able to isolate whether a fault lives in firmware, circuit design, a component, assembly, or interconnect, and back the conclusion with data
- Ability to read and interpret schematics, datasheets, and PCB layouts; solid grasp of analog and digital circuit fundamentals
- Hands-on proficiency with lab instruments: oscilloscopes, logic analyzers, DMMs, power supplies, and in-circuit debuggers
- Proficiency in C in resource-constrained embedded environments (C++ a plus)
- Experience with bare-metal microcontroller development and bring-up (e.g., ARM Cortex-M, PIC, STM32)
- Understanding of low-level hardware interfaces: I2C, SPI, UART, RS-485, Ethernet (MAC/PHY), GPIO, PWM
- Working experience with embedded Linux (user-space applications, networking, SSH/user security, filesystems)
- Python for test automation, data capture/analysis, and engineering tools
- Experience with Git in shared codebases
- Clear written communication: able to write failure analysis findings for management, customers, and suppliers
- Experience with transportation, outdoor industrial, or safety-critical systems
- RGB LED color mixing fundamentals (color spaces, chromaticity, LED binning, per-channel current/PWM balancing)
- Familiarity with communication protocols used in ITS, such as NTCIP, SNMP, and multi-drop RS-485
- LED display technology: constant-current LED drivers, PWM grayscale, flicker-free refresh, LED thermal and failure modes
- Experience with RTOS and embedded TCP/IP stacks (e.g., FreeRTOS/lwIP, ThreadX/NetX Duo)
- Industrial networking: managed Ethernet switches, cellular modems, PPP
- PCB design tool experience (e.g., Altium, KiCad, OrCAD)
- Knowledge of PCBA manufacturing and DFM: SMT/through-hole assembly, conformal coating, connector selection and retention, and working with contract manufacturers on failure analysis
- Environmental and reliability testing: thermal (−34 to +74 °C per NEMA TS 4, and solar loading), vibration/shock, and accelerated life testing
- Knowledge of power management, backup power (supercapacitor/battery), watchdog timers, and fail-safe system design
- Experience with robust field-update mechanisms (e.g., bootloaders, remote updates)
- Exposure to EMI/EMC considerations in embedded design
- Familiarity with ISO 9001 quality systems and corrective-action processes
- Shell scripting (Bash) and comfort with Linux/WSL development environments
- 3D CAD and 3D printing for fixtures and small mechanical parts
- Ability to work outdoors in varying weather conditions during field visits
- Ability to work from bucket trucks or at heights with proper safety equipment and training
- Ability to lift up to 50 lbs
- Valid driver’s license
- Benefits including medical, dental, and vision insurance, 401(k) with company match, and paid time off
- Work on public safety systems on Colorado highways and across the country, with real-world impact
- A small, collaborative engineering team where your work goes directly from the bench to the field
- Hybrid schedule with room for professional growth
- A chance to help shape the future of intelligent transportation infrastructure
Skyline Products is an Equal Opportunity Employer; all decisions are made without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, sexual orientation, gender identity, or any other legally protected status.