HVAC Installer
Manhattan Plumbing & Heating
·3 weeks ago
- Salary
- $32 – $35/hr
- Location
- Belgrade, Montana
- Type
- Full-time
- Department
- Engineering
- Education
- High School
- Clearance
- Not required
- Source
- BetterTeam
Description
- Install HVAC equipment and related components in accordance with approved job specifications, manufacturer instructions, applicable codes, and company standards.
- Install furnaces, air conditioners, heat pumps, ductless mini-splits, ventilation equipment, thermostats, ductwork, refrigerant piping, condensate drains, and associated system components as assigned.
- Complete equipment change-outs, new construction installations, and system upgrades.
- Install and connect ductwork, plenums, fittings, registers, grilles, equipment supports, and related air distribution components.
- Complete refrigerant piping, condensate management, venting, combustion air, and electrical/control connections within the employee’s training, qualifications, and legal scope of work.
- Coordinate with plumbing and electrical trades when work requires additional expertise or licensed trade involvement.
- Verify equipment placement, clearances, service access, drainage, airflow provisions, and installation details before considering the job complete.
- Perform required startup procedures, system checks, testing, and commissioning according to manufacturer requirements and company procedures.
- Identify installation conflicts, defective materials, missing parts, and unexpected site conditions; communicate issues promptly rather than proceeding with an improper installation.
- Protect the customer’s property and existing finishes throughout the installation process.
- Follow all M.Air safety procedures, applicable OSHA requirements, building and mechanical codes, and manufacturer instructions.
- Use required personal protective equipment and appropriate tools, ladders, lifting equipment, and fall protection.
- Follow safe procedures for handling refrigerants, electrical components, gas-fired equipment, combustion venting, and other installation hazards.
- Maintain awareness of jobsite conditions and stop work when an unsafe condition or potentially hazardous installation is identified.
- Report accidents, near misses, property damage, equipment defects, and safety concerns immediately.
- Maintain required certifications and qualifications for assigned work, including applicable refrigerant-handling credentials.
- Never bypass safety devices, ignore code requirements, or conceal installation deficiencies to save time.
- Review assigned work orders, installation scope, equipment specifications, drawings, material lists, and special instructions before beginning work.
- Confirm that required equipment, materials, tools, and jobsite access are available.
- Communicate missing materials, scheduling conflicts, scope discrepancies, and potential delays to the appropriate manager as early as possible.
- Organize work to minimize unnecessary trips, wasted materials, downtime, and disruptions to other trades.
- Work efficiently while maintaining installation quality, safety, and compliance.
- Coordinate work sequencing with coworkers, general contractors, other trades, and the office team.
- Take responsibility for assigned tasks and contribute to the overall progress of the installation.
- Avoid preventable callbacks by verifying connections, controls, drainage, venting, and system operation before leaving the jobsite.
- Inspect completed work for workmanship, code compliance, proper support, sealing, insulation, and accessibility.
- Verify required electrical and control connections, condensate drainage, refrigerant-system integrity, combustion venting, and other applicable installation requirements.
- Complete required startup and commissioning checklists, measurements, and test results.
- Verify thermostat operation, equipment staging, system response, and proper operation of applicable heating and cooling functions.
- Identify and correct deficiencies within the employee’s scope before requesting final inspection or turnover.
- Escalate unresolved problems to the installation manager or appropriate technical resource.
- Support inspections, punch-list completion, warranty requirements, and corrective work as assigned.
- Represent M.Air professionally when interacting with customers, general contractors, inspectors, vendors, and coworkers.
- Arrive prepared and on time, wearing the required M.Air uniform and maintaining a professional appearance.
- Communicate respectfully and clearly regarding installation progress, jobsite access, disruptions, and completion expectations.
- Protect floors, walls, furniture, landscaping, and other property; use appropriate coverings and cleanup procedures.
- Maintain a courteous, solution-oriented attitude, even when the job becomes challenging.
- Direct customer questions regarding system operation, scope changes, pricing, or additional work to the appropriate person when authorization is required.
- Provide basic equipment-operation instructions and customer handoff information as assigned.
- Never make unauthorized promises, pricing commitments, scope changes, or warranty representations.
- Complete all required work-order documentation in the M.Air’s designated system, including Sage Field Operations when applicable.
- Record installation details, equipment model and serial numbers, materials used, test results, startup information, and outstanding deficiencies.
- Upload required jobsite photos showing equipment installation, connections, completed work, and relevant concealed components before they become inaccessible.
- Document changes to the original scope, unexpected conditions, additional material requirements, and work requiring follow-up.
- Communicate job status, completion, inspection needs, and outstanding items to the office and installation manager.
- Confirm that required documentation, checklists, photos, and commissioning records are complete before closing out the job.
- Ensure the customer and office team have the information needed for warranty registration, invoicing, future service, and maintenance.
- Maintain and properly use assigned tools, equipment, and personal protective equipment.
- Keep M.Air vehicles clean, organized, fueled, and ready for work.
- Perform routine vehicle inspections and promptly report maintenance needs, damage, or safety concerns.
- Organize and secure equipment and materials to prevent damage, loss, and unnecessary waste.
- Track material usage and report shortages, defective products, and damaged equipment.
- Use M.Air tools, vehicles, and materials responsibly.
- Maintain an organized work area and return unused materials, tools, and equipment to their designated locations.
- Contribute to a team culture built on cooperation, respect, shared responsibility, and professional pride.
- Help coworkers when appropriate, share knowledge, and support the overall success of the installation.
- Take ownership of assigned work rather than assuming another team member will finish or correct it.
- Communicate problems directly and constructively through the appropriate channels.
- Accept coaching, feedback, and direction from supervisors and experienced team members.
- Avoid gossip, finger-pointing, unnecessary negativity, and behavior that undermines team morale.
- Support service technicians and other departments by providing accurate installation information and identifying issues that may affect future serviceability.
- Recognize that the success of the team depends on each person completing their responsibilities consistently.
- Perform site evaluations for HVAC equipment replacements, new installations, system upgrades, and new construction projects as assigned.
- Gather accurate field measurements, equipment information, photographs, and jobsite conditions necessary to prepare installation estimates.
- Review plans, specifications, existing equipment, ductwork, refrigerant piping, venting, electrical requirements, condensate drainage, access limitations, and other installation considerations.
- Identify required equipment, materials, fittings, accessories, labor, specialty tools, subcontractor coordination, and other resources necessary to complete the proposed scope of work.
- Prepare accurate material takeoffs and equipment lists, including quantities, sizes, model information, and special-order requirements.
- Identify potential complications, code compliance issues, concealed conditions, equipment access concerns, and other factors that may affect installation cost, schedule, or feasibility.
- Estimate labor hours and crew requirements based on project complexity, site conditions, equipment type, and installation scope.
- Identify opportunities to improve installation efficiency, equipment serviceability, energy performance, and long-term system reliability.
- Communicate discrepancies between the existing conditions, customer requests, project plans, and proposed scope to the appropriate manager before an estimate is finalized.
- Coordinate with suppliers and the office team to obtain equipment specifications, material availability, lead times, and pricing as needed.
- Prepare estimates using company-approved estimating tools, templates, pricing structures, and procedures.
- Clearly document assumptions, exclusions, allowances, required customer-provided items, and work that may require additional authorization.
- Submit estimates and supporting documentation for review and approval according to company policy.
- Maintain accurate records of field measurements, material lists, and estimating notes so the installation team can use the information to plan and execute the work.
- Review approved estimates, proposals, work orders, plans, and specifications before beginning installation.
- Confirm that the approved scope, equipment selections, material requirements, and installation expectations align with actual site conditions.
- Identify missing materials, scope discrepancies, estimating errors, and potential cost overruns as early as possible.
- Communicate changes in site conditions, customer requests, and additional work requirements to management before proceeding beyond the approved scope.
- Prepare supplemental material lists, labor assessments, or change-order information when additional work is identified.
- Obtain the required authorization before performing work that changes the approved scope or creates additional charges.
- Provide feedback to management on actual labor hours, material usage, unexpected conditions, and differences between estimated and actual project costs.
- Help identify recurring estimating errors, installation inefficiencies, and opportunities to improve the accuracy of future estimates.
- Accuracy: Field measurements, equipment selections, material quantities, and labor assessments are complete and reliable.
- Scope identification: Installation requirements, exclusions, and potential complications are identified before work begins.
- Cost awareness: Estimates account for appropriate labor, equipment, materials, and known jobsite requirements.
- Communication: Missing information, risks, and changes are communicated promptly.
- Estimate-to-actual performance: Actual labor and material usage are documented to support continuous improvement.
- Authorization: Pricing, customer commitments, and changes to approved work follow company approval procedures.
- Mechanical aptitude and the ability to learn HVAC installation practices.
- Ability to use hand tools, power tools, measuring devices, and installation equipment safely.
- Ability to read and follow work orders, equipment installation manuals, plans, and technical instructions.
- Commitment to safe work practices, quality workmanship, punctuality, and professional conduct.
- Ability to work cooperatively with coworkers, customers, contractors, and management.
- Ability to follow instructions, accept feedback, and complete required documentation.
- Valid driver’s license and acceptable driving record, if driving is required for the position.
- Ability to meet the physical requirements of HVAC installation work, with or without reasonable accommodation.
- Previous residential or light commercial HVAC installation experience.
- Experience with equipment change-outs, new construction, ductwork, refrigerant piping, and system startup.
- Knowledge of HVAC electrical controls, airflow, combustion venting, condensate management, and equipment commissioning.
- EPA Section 608 certification appropriate to assigned refrigerant-handling duties.
- Familiarity with applicable mechanical codes, manufacturer specifications, and inspection requirements.
- Experience with heat pumps, ductless systems, high-efficiency furnaces, or hydronic heating applications.
- Relevant technical school, apprenticeship, manufacturer, or industry training.
- Standing, walking, bending, kneeling, crouching, climbing, and reaching for extended periods.
- Working on ladders and elevated surfaces when properly trained and equipped.
- Lifting, carrying, positioning, and maneuvering HVAC equipment, ductwork, tools, and materials within applicable safe-lifting practices and available assistance.
- Using hand tools, power tools, and measuring instruments.
- Working around dust, noise, temperature extremes, construction materials, and other typical jobsite conditions.
- Wearing required personal protective equipment.
- Generally Monday through Friday, based on the company’s assigned installation schedule.
- Standard work hours are established by management and may vary according to project requirements.
- Overtime, early starts, schedule adjustments, or occasional extended days may be necessary to meet project commitments.
- Reliable attendance, punctuality, and readiness to begin work at the scheduled time are essential.
- Employees are expected to communicate absences, delays, and scheduling conflicts according to company policy.
- Quality: Installations are complete, code-compliant, reliable, and consistent with M.Air standards.
- Safety: Required safety practices are followed without shortcuts.
- Productivity: Work is completed efficiently while maintaining quality and safety.
- First-time completion: Preventable deficiencies, missing components, and callbacks are minimized.
- Documentation: Work orders, required photos, commissioning records, and closeout information are completed accurately and on time.
- Customer experience: Customers and contractors receive professional, respectful service, and their property is protected.
- Dependability: The employee arrives prepared, follows through on commitments, and communicates issues promptly.
- Teamwork: The employee contributes to a cooperative work environment and supports the success of the entire team.
- Accountability: The employee takes responsibility for their work, corrects mistakes, and applies feedback to improve performance.
- Stewardship: M.Air vehicles, tools, equipment, materials, and customer property are treated with care.
- We win together, solve problems together, and take care of the customer together.
- We expect every installer to take pride in their work, support their coworkers, communicate openly, and leave every job in a condition they would be proud to put their name on.
- Our standard is not simply to install equipment. It is to deliver safe, dependable, professional systems that serve our customers well and protect the reputation of our company.
- Follow all M.Air safety policies and procedures.
- Maintain compliance with applicable local, state, and federal codes and regulations.
- Use proper PPE and maintain safe jobsite conditions.
- Operate company vehicles and equipment safely.
- Maintains a meticulously clean, inventoried, stocked, tooled, M.Air service vehicle. Participates in periodic inventory and truck inspections.
- Maintains tools and machinery in good condition and uses all tools in a safety-conscious manner.
- Participate in team meetings, training, and coaching sessions.
- Support dispatch and scheduling efforts through effective communication.
- Collaborate with coworkers and assist other departments when needed.
- Mentor apprentices or junior technicians when assigned.
- Basic change order cost-estimating experience.
- Computer proficiency to include Microsoft Word, Excel, Google Workspace, Digital CRM & Dispatch Software. *Sage Field Operations – Bonus.
- Participate in scheduled after-hours and weekend on-call rotation.
- Respond to emergency service calls in a timely and professional manner.
- Maintain readiness and availability during assigned on-call periods.
- Ability to lift, carry, push, and pull equipment and materials. Ability to lift 50lbs regularity, 75 lbs. occasionally and lift 100lbs with assistance.
- Ability to work in confined spaces, crawlspaces, attics, rooftops, and mechanical rooms.
- Ability to stand, kneel, bend, climb ladders, and work in varying weather conditions.
- Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception.
- Ability to work extended hours, nights, or weekends.
- Ability to safely operate service vehicles and tools.
- Ability to work under stressful conditions and may be exposed to verbal and/or physical confrontations.
- GED or high school diploma or equivalent.
- Journeyman license.
- Preferred: Associate’s degree in related field.
- Vocational training or apprenticeship program.
- Full-time - Core hours 7:00 am through 5:00 pm
- Monday through Friday
- Participation in rotating on-call schedule required
- Overtime may be required based on seasonal demand and emergency service needs
- Service Manager.
- Field Supervisor.
- Operations Manager.
- Dispatch Team.
- Customer Service Representatives.
- Install Team.
- Warehouse & Parts Personnel.
- Other Service Technicians.