Machinery Engineer
TealEnergi
·Today
- Location
- Sabine Pass, TX
- Workplace
- Onsite
- Type
- Full-time
- Department
- Engineering
- Experience
- 10+ years
- Closing date
- Today
- Source
- Vincere
Description
Page 1 of 3
Position: Machinery Engineer
Location: Sabine Pass, LA – Onsite
Summary:
The Machinery Engineer will serve as a subject matter expert for critical rotating and mechanical
equipment supporting LNG operations, maintenance, commissioning, and start-up activities. The
position will focus heavily on GE Frame 7EA gas turbine-driven main refrigerant compressor strings,
along with compressors, pumps, helper motors, and associated auxiliary systems.
This role will provide machinery engineering support for an operating LNG train while also supporting
the commissioning and start-up of additional LNG trains. The Machinery Engineer will work closely with
Operations, Maintenance, Engineering, and project/commissioning teams to improve equipment
reliability, resolve technical issues, optimize machinery performance, and ensure long-term operability
and maintainability.
Job Duties:
Machinery Engineering & Reliability
• Serve as a subject matter expert for critical rotating equipment, including GE Frame 7EA gas
turbines, centrifugal compressors, screw compressors, pumps, helper motors, and associated
auxiliary systems.
• Provide technical support for LNG train and utility machinery systems, with primary focus on
operations and maintenance support for Frame 7EA-driven main refrigerant compressor strings.
• Develop and implement machinery reliability, troubleshooting, and performance optimization
strategies to support production goals.
• Conduct root cause analyses for machinery and equipment failures and develop actionable
recommendations to improve reliability.
• Evaluate equipment operating data, vibration trends, process parameters, machinery
performance, and condition-monitoring data to identify emerging failure mechanisms and
reliability risks.
• Review equipment operating envelopes, performance limitations, machinery protection
systems, control logic, and operating procedures.
• Provide technical guidance for machinery repairs, overhauls, modifications, upgrades, and
equipment replacement strategies.
• Support development of machinery operating limits, baseline performance data, vibration
acceptance criteria, and initial condition-monitoring requirements.
• Provide technical recommendations to management regarding equipment risks, operational
constraints, reliability threats, and mitigation priorities.
Technical Review & Compliance
• Review and approve technical designs, maintenance plans, and operational procedures to
ensure alignment with industry standards and recognized best practices.
• Lead or support machinery audits, risk assessments, and technical reviews to identify gaps and
improve equipment reliability and safety.
• Ensure machinery systems comply with applicable API, ASME, ISO, IEC, and OEM requirements.
Page 2 of 3
• Review machinery protection systems, operating limits, control logic, and functional
requirements for critical rotating equipment.
• Support compliance with applicable health, safety, and environmental requirements.
Commissioning & Start-Up Support
• Provide machinery engineering support for commissioning and start-up of Frame 7EA
mechanical-drive units and associated compressor systems.
• Serve as the primary machinery engineering liaison between Operations/Engineering
organizations and project/commissioning teams supporting LNG trains under construction and
commissioning.
• Maintain visibility of commissioning activities, equipment readiness, technical issues, design
changes, outstanding deficiencies, and start-up progress.
• Proactively communicate commissioning developments, equipment issues, lessons learned, and
potential operational impacts to the operating organization.
• Ensure technical knowledge gained during commissioning and start-up is captured and
transferred to permanent Operations, Maintenance, and Engineering teams.
• Facilitate early involvement of Operations and Engineering personnel in commissioning
activities, equipment reviews, and technical decisions affecting long-term operability and
maintainability.
• Review and validate machinery commissioning procedures, start-up and shutdown sequences,
equipment operating procedures, and functional test requirements.
• Help ensure engineering organizations remain actively involved throughout commissioning,
start-up, and transition into operations.
Technical Leadership & Development
• Strengthen internal machinery engineering capabilities through mentoring and development of
entry- and mid-level engineers.
• Provide practical coaching and hands-on technical guidance during machinery engineering,
troubleshooting, reliability, and commissioning activities.
• Promote long-term technical competency and organizational knowledge retention.
Job Requirements:
• Minimum of 10+ years of experience working with gas turbines.
• Strong experience with compressor systems or mechanical-drive equipment.
• Experience supporting the operations, start-up, and/or commissioning of a major industrial
facility or capital project.
• Strong knowledge of rotating equipment reliability, troubleshooting, condition monitoring,
machinery performance, and failure analysis.
• Experience evaluating vibration data, operating parameters, equipment performance,
protection systems, and machinery control logic.
• Knowledge of applicable industry standards, including API, ASME, ISO, IEC, and relevant OEM
requirements.
• Ability to provide technical leadership across Operations, Maintenance, Engineering, and
project/commissioning organizations.
• GE Frame 7EA gas turbine experience is highly preferred.
• Main refrigerant compressor experience within LNG or olefins facilities is highly preferred.
Page 3 of 3
• Experience with centrifugal compressors, screw compressors, pumps, helper motors, and
associated auxiliary systems is preferred.
• Must be able to work onsite at the Sabine Pass terminal.
• Typical work schedule is approximately 6:30 a.m. to 3:00 p.m., with the potential for extended
hours to approximately 4:30 p.m. and overtime based on operational or project requirements.
• Expected assignment duration is approximately two years.
Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to
successfully perform the essential functions of this job. While performing the duties of this Job, the
employee is regularly required to sit, walk and stand; talk or hear, both in person and by telephone; use
hands repetitively to finger, handle, feel or operate standard office equipment. The employee is
frequently required to reach with hands and arms. The employee is occasionally required to stand; walk
and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 10 pounds and
occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close
vision, distance vision and the ability to adjust focus.
About Teal Energi:
Teal Energi is a technical manpower provider with extensive experience supporting the successful
execution and operation of major capital project investments. Forged through a desire to provide best-
in-class service to clients, candidates, and contractors alike, Teal Energi works through its offices
nationwide to provide regional support to a wide range of sectors including both traditional energy and
energy transition initiatives (e.g., LNG, hydrogen, wind, solar), as well as manufacturing, mining, and
infrastructure.
Teal Energi is committed to fostering, cultivating and preserving a culture of diversity, equity and
inclusion. All qualified applicants will receive consideration for employment without regard to race,
color, age, disability, ethnicity, gender or gender identity, language, national origin, physical or mental
ability, political affiliation, religion, sexual orientation, or protected veteran status.