Hiring.Camp

UAV Systems Engineer - Propulsion & Actuation (m/f/d)

TYTAN Technologies GmbH

·

Oct 14, 2026

Location
Munich, Bayern, Germany
Workplace
Onsite
Type
Full-time
Department
Engineering
Seniority
Senior
Visa
Not sponsored
Source
Recruitee

Description

TYTAN Technologies

The PACE is fast. The expectations are high. The contribution matters. Working at TYTAN is more than a job, this is a mission. We push boundaries, think big, and hold ourselves to the highest standard. Our mission and values guide everything we do, and we're looking for people who are driven by ownership, embrace challenges, and are energized by meaningful work. If you're motivated by impact and thrive in dynamic environments, you'll fit right in.

At TYTAN, we aim to set a global standard in autonomous air defense with AI-driven, cost-efficient systems that counter unmanned aerial threats at scale. We protect people. We protect critical infrastructure. We protect European sovereignty.

We are looking for a UAV Systems Engineer to own the propulsion, actuation and thermal subsystems of our UAV platforms. You will size, select, integrate and validate motors, ESCs, servos and actuators, and make sure every subsystem stays within its thermal limits across the full flight envelope. Working closely with Aircraft Design, Avionics, Electronics and Battery Engineering, you will take these subsystems from first trade study to qualified, production-ready hardware.

Your roadmap to make an impact

Propulsion

  • Size and select motors, propellers and ESCs against thrust, efficiency, mass and cost targets across the flight envelope.

  • Characterize motor and propeller performance on thrust stands and dynamometers, and build the propulsion models used by Aircraft Design and GNC.

  • Define ESC configuration, current limits and failure behavior together with the Electronics team and suppliers.

Actuation

  • Specify, select and qualify servos and electromechanical actuators for control surfaces and onboard mechanisms.

  • Derive actuator requirements (torque, speed, backlash, bandwidth, holding load, duty cycle) and verify them on test benches.

  • Integrate actuators with the flight controller and avionics, including interfaces such as PWM and CAN, position feedback and fault detection.

Integration & Test

  • Plan and run environmental tests such as thermal cycling, vibration and ingress protection.

  • Analyze flight logs for temperatures, currents and actuator loads, and feed the findings into the next design iteration.

  • Own subsystem requirements, interface control documents, test procedures and reports.

  • Act as the technical counterpart to motor, ESC and actuator suppliers.

  • Support the transfer to series production through design for manufacturing, acceptance tests and supplier qualification.

Skills

PythonMATLABSolidWorksCATIA

Similar Jobs

14

UAV Systems Engineer

Neros Technologies·Ukraine Office

6mo ago

UAV Systems Engineer

Everstar·Kyiv, Київ

6mo ago

Systems Engineer – UAV Architecture, Integration & Product Development (m/f/d)

Nex Aero

Guidance Systems Engineer (UAV)

TechState·Київ, місто Київ·Hybrid

1mo ago

Technical Support Engineer (UAV Systems, Defense Tech)

Intelic·Kyiv, Kyiv City·Hybrid

1mo ago

UAV Systems Engineer - Sensors (m/f/d)

TYTAN Technologies GmbH·Munich, Bavaria·Onsite

1mo ago

Field Integration Engineer (UAV Systems)

EnErgo recruitment

Senior Electronics Engineer - UAV & Ground Systems (m/f/d)

Nex Aero

UAV Test Engineer (Systems/Mechatronics)

Seneca·Sausalito, California·Onsite

11mo ago

Senior UAV Control Systems Engineer

Avol·Brooklyn·Onsite

1y+ ago

Electronics Engineering Lead – UAV & Ground Systems (m/f/d)

Nex Aero

System Engineer UAV-gc contracten

Strukton Nederland·Utrecht, The Netherlands·Remote

2mo ago

Forward Deployed System Integration Engineer - L2 (UAV Robotics) - EU

Fiducial·Delft, South Holland·Hybrid

4mo ago

Forward Deployed System Integration Engineer - L2 (UAV Robotics)

Fiducial·Delft, South Holland·Hybrid

11mo ago