Hiring.Camp

Integration Build Engineer (Super Heavy Booster)

Spacex

·

May 27, 2026

Location
Starbase, TX · Brownsville, TX, United States
Type
Full-time
Department
Booster Integration Engineering
Experience
2+ years
Education
Master
Source
Greenhouse

Description

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

INTEGRATION ENGINEER (STARSHIP)

As an Integration Engineer you will be responsible for establishing requirements and developing tooling and processes to enable at-rate production of the most powerful rocket ever made. Your role will focus on integration of avionics, propulsion, and structural assemblies, and you will work with both design engineering and technician teams daily. You will be well-positioned to influence overall vehicle architecture, with a focus on design for reliability and manufacturability.

RESPONSIBILITIES

  • Operate as a systems level engineer to collect production requirements then plan and execute the build, integration, and validation of flight hardware to those requirements
  • Design and implement tooling solutions to eliminate assembly error, improve quality, and accelerate build
  • Automate novel processes to ensure repeatability on a large scale production line
  • Prove that a subsystem work center meets cycle time requirements, or own the design change required to meet target cycle time
  • Become a subject matter expert for the build of a vehicle level system like aero control surfaces, propellant feed systems, actuation systems, thermal protection systems, secondary structures, avionics, primary structure, etc.
  • Generate and maintain design for manufacturing requirements for the processes used to build Starships and Super Heavy Boosters

BASIC QUALIFICATIONS

  • Bachelor's degree in an engineering discipline
  • 1+ years of hands-on engineering experience (design teams and previous internships qualify)

PREFERRED QUALIFICATIONS

  • Master's degree in an engineering discipline
  • 1+ year of system level acceptance test exposure
  • 2+ years of professional experience in the field of aerospace/mechanical engineering
  • 2+ years of experience with GD&T concepts
  • Experience with large steel structure construction (civil, naval, or mechanical)
  • Experience in process development, facility and line layouts, error-proofing, factory optimization, and lean principles
  • Experience with Siemens NX and Teamcenter CAD, PLM, Process Simulate, and other automation systems
  • Prior experience with developing, maintaining and improving welding processes
  • Strong interpersonal and organizational skills

ADDITIONAL REQUIREMENTS

  • Flight hardware typically is built in tight quarters and physical dexterity is required
  • Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings and climbing hand over hand
  • Typically exposed to work in extreme outdoor environments – heat, cold, rain
  • Work performed in an environment requiring exposure to fumes, odors, and noise
  • Schedule varies depending on site operational needs; flexibility required
  • Flexibility to travel to remote build sites, up to 10%
  • Stand: Up to 6 hours per day
  • Sit: Up to 6 hours per day
  • Push/Pull: Up to 50lbs. (unassisted) 30 minutes to 1 hour per day
  • Overhead reach: Up to 1 hour per day
  • Walk: Up to 1 hour per day
  • Lift/Carry: Up to 25lbs. (unassisted) 30 minutes to 1 hour per day
  • Climb (ladder/stairs): Up to 6 hours per day
  • Kneel/Crouch: Up to 6 hours per day
  • Upper body twist: Up to 6 hours per day
  • Ability to work in temperatures over 80 degrees 6 hours or greater per day
  • Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, using an air purifying respirator, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description
  • Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected]. 

Similar Jobs

18

Integration Build Engineer

Vast·Long Beach, California

1w ago

Integration Build Engineer

Vast·Hawthorne, California

2mo ago

Build & Integration Engineer

K2Spacecorporation·Los Angeles, California

6mo ago

Lead Integration Build Engineer

Vast·Long Beach, California

2mo ago

Senior Platform Integration Engineer – Build Cloud and SaaS Integrations at Scale for the Venari Platform

Venari Security·Les Berges du lac 2, TUNIS

3mo ago

Autonomy Integration Build Engineer

Saronic·Franklin, Louisiana·Onsite

4mo ago

Prototype E&E Integration & Build Engineer (EE)

Vinfast·Vietnam·Remote

5mo ago

Principal Build & Integration Engineer

K2Spacecorporation·Los Angeles, California

6mo ago

Senior Build & Integration Engineer

K2Spacecorporation·Los Angeles, California

6mo ago

Manufacturing Engineer, Hardware Build & Integration

Helion Energy·Everett, Washington·Onsite

1mo ago

GPU IP Integration Model Build Engineer

Intel·IND - Bangalore, India

2mo ago

GPU IP Integration Model Build Engineer

Intel·IND - Bangalore, India

2mo ago

Senior / Staff Build Reliability Engineer (Integration)

Vast·Long Beach, California

4mo ago

NPC 2nd shift Build Engineer(E3)- Heterogenous Integration

Amat·Austin, Texas

1w ago

NPC Build Engineer(E3)- Heterogenous Integration

Amat·Austin, Texas

1w ago

NPC Build Engineer(E3)- Heterogenous Integration

Applied Materials·Austin, Texas

1w ago

NPC 2nd shift Build Engineer(E3)- Heterogenous Integration

Applied Materials·Austin, Texas

1w ago

Senior Software Engineering - Autonomy Build & Integration

General Motors·Markham, Ontario·Remote

2mo ago