Hiring.Camp

Lathe Operator

United Rolls Inc

·

Jul 9, 2026

Location
Canton, OH
Source
Paylocity

Description

Description

Summary Job Description: Responsible for running lathe machines. This involves tasks related to set-up, machine operation, and disposing of chips as required.


Tools and Equipment: lathes, variety of cutters and hand tools, chip pushers, steady rests, cranes, shovels, scale, tape measure, and brooms. This list is not all inclusive.


Job Functions and Functional Job Task Elements


Task 1: Lathe Operation


  • Responsible for turning necks, facing, centering, etc -finishing lathe-smaller finer cuts-customer centers, etc.
  • An overhead crane is used on these machines to set rolls and take out chip boxes.
  • The employee can hook up the chain for the chip box, by squatting to the level of the chain and not having to lift it to place it on the crane hook.
  • Finishing Lathe- the employee needs to make an average of 4 tools changes per shift on this machine. Based on the design of the machine, the tool change is made between knee and waist level, and some have easier leverage than others.
  • They weigh between 10-40#s and are handled on an infrequent basis per hour.
  • Once set-up is completed, the employee runs the machine using automatic controls between waist and chest level with minimal coordination of bilateral hands.
  • When the machine is running, the employee is only required to supervise the operation and dislodge chips on an occasional to frequent basis per hour.
  • Chips are pushed by climbing on 2 steps and using a chip pusher to dislodge the chips while using a partial squatting motion in the standing position.
  • Chips can also be pushed from a vertical position at ground level and this mostly involves using bilateral arms.
  • Some lathes do not have hydraulics to move the rolls on the machine.
  • The rolls have to be locked or unlocked from their location by using a variety of cranks, wrenches, etc.
  • This involves increased use of bilateral upper extremities with twisting of the trunk. Need to be able to push and pull with at least 50#s of force to use the tools.
  • To apply drivers to roll may be required to lift up to 90# waist level to neck of roll several times each month.
  • Rough Lathe-needs to be able to lift a 50# tool without a jib crane and place it at 28 inches off the floor from the left side and make sure it fits in the slot for the tool.
  • There is only a space of 2 feet on the side of the insert, so that the employee would not be able to stand in front of it and perform this task.
  • Also need to be able to handle a chip pusher that is 10 feet and 8 inches long and weighs 15# on an occasional to frequent basis per hour.
  • Need to be able to push chips that are approximately 12 feet away.
  • Dual Compound -the cutters on this machine need to be mounted twice the number of times as a regular lathe as they cut from both ends.
  • The parts are mounted sideways from the right and the left.
  • On one side the part is mounted 25 inches off the floor from approximately 2 feet away and from 6 inches away on the other side.
  • Do not need to use a chip pusher on this machine as they move into the underground bin by themselves, but the employee needs to be able to use a broom to knock them down with minimal force on an infrequent to occasional basis per hour.


Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned.

If you meet the requirements above and are interested in joining our team, please apply with your updated resume. We look forward to reviewing your application!

Requirements

Shift: 8 hours regular shifts and 12 hours over-time shifts. Breaks: 30 minute lunch. . Flooring: Cement, wooden platforms, grates, rubber mats. Environment: Machine shop environment. Need to be careful with other employees while moving overhead cranes in the vicinity. Safety Equipment: Hard hat, gloves, safety glasses, and steel-toe shoes. Strength Range: Medium-Heavy strength range.

Similar Jobs

30

Lathe Operator

Columbia Forest Products·Rutherglen, Scotland

4d ago

Lathe Operator

JM Fabrication·Arlington, Texas

1mo ago

Lathe Operator

Fc Industries Inc·Dayton, Ohio·Onsite

4mo ago

Lathe Operator

Laboratory Testing·Hatfield, Pennsylvania

5mo ago

Lathe Operator

Kaney, Inc·Freeland, Michigan

6mo ago

Lathe Operator

Finkl Steel·Detroit, Michigan +1

1y+ ago

CNC Lathe Operator

Flexible Concepts Inc·Elkhart, Indiana

1d ago

Welding Lathe Operator

SMS group·Taylor, Michigan

2d ago

CNC Lathe Operator

Energy Products and Services·Kilgore, Texas·Onsite

1w ago

CNC Lathe Operator (Day Shift) - Stabil Drill - Thomas Rd, Houston, TX

SESI Corp·Houston, Texas

1w ago

Machining - CNC Turning Lathe Operator Carbide

Peak Toolworks·Marieville, Quebec

1w ago

Spin Lathe Operator B

The Senior Company·Burbank, California·Onsite

1w ago

CNC Machinist / Lathe Operator

Tradesmen·Omaha, Nebraska

1w ago

CNC Lathe Operator – Level 1 – Daylight – IGS A&D

IGS Industries·Pennsylvania, US·Onsite

1w ago

CNC Lathe Operator / Setter (Weekend Days)

Hunters 4 Staff·Onsite

CNC Lathe Operator 2nd shift

RBC Bearings·Torrance, California

2w ago

CNC Lathe Operator

Empower Manufacturing Llc·Moraine, Ohio

2w ago

CNC Lathe Operator - Second Shift

Empower Manufacturing Llc·Moraine, Ohio

2w ago

CNC Turning Lathe Operator

Heritage Cutter·Millersburg, Pennsylvania

2w ago

Dental CAM, Milling & Swiss Lathe Operator

Denbright Dental Labs·Burbank, California

3w ago

Sonic CNC Operator - Lathe & Mill

SESI Corp·Midland, Texas

3w ago

CNC Lathe Operator

"Radiac Abrasives, Inc."·Oswego, Illinois

1mo ago

2nd Shift Large Lathe Operator

Grand Valley Manufacturing·Titusville, Pennsylvania

1mo ago

Automatic Lathe Operator

Samuel, Son & Co. 1855·Angola, Indiana

1mo ago

SENIOR CNC Lathe Operator

Salvo Technologies Inc·Largo, Florida

1mo ago

CNC Lathe Operator Day or Night Shift

A & R Engineering Co Inc·California, US

1mo ago

CNC Mill and Lathe Operator (2nd Shift)

Spirax Group·Durex Industries - US - 190 Detroit Street, Cary

1mo ago

CNC Mill and Lathe Operator (1st Shift)

Spirax Group·Durex Industries - US - 190 Detroit Street, Cary

1mo ago

CNC Lathe Operator, Setup (2nd Shift)

Spirax Group·Durex Industries - US - 190 Detroit Street, Cary

1mo ago

CNC Lathe Operator, Setup (1st Shift)

Spirax Group·Durex Industries - US - 190 Detroit Street, Cary

1mo ago